Dryer Vent Cleaning in Huron, SD
Tell us about your home, and a licensed contractor who covers Beadle County will get in touch.
Tell us about the job
It takes about a minute.
Cold vent walls catch the lint your dryer pushes out
Your dryer pushes out warm, damp air every time it runs. That air has to travel through a vent that sits in cold space for most of its length, and in Huron the outside air it's fighting against averages 9°F on a winter night. The warm air cools fast against the metal, and the moisture in it beads up on the inside of the vent. Lint sticks to a wet wall a lot better than it sticks to a dry one.
Once that lint builds up, the air from your dryer has a harder time getting outside. That means more heat and moisture staying in the line instead of leaving the house, and a vent that's doing less of the job it's there for.
- 9°F
- the average winter night, and cold vents catch damp lint
- 9 months
- September through May, the vent stays cold
NOAA nClimDiv, 1991–2020 normals
- How often should a dryer vent be cleaned?
- A dryer vent needs cleaning at least once a year. If you run large loads often, or if your vent run is long or has a lot of turns, check it more often than that. A clean vent lets your dryer push hot air outside quickly, so clothes dry faster and the machine does not have to work as hard.
- Can I clean my dryer vent myself?
- You can clean the first few feet, where you disconnect the duct from the back of the dryer, and the hood outside where the vent exits your house. What you cannot easily reach is the lint packed further down the run, especially if the vent bends or travels any distance to get outside. A contractor uses a brush and vacuum sized for the full length of the duct, which gets at what you cannot.
- What are the signs of a clogged dryer vent?
- Clothes come out hot to the touch but still damp, or a load that used to dry in one cycle now takes two. The dryer itself may run hotter than usual, and you might notice a burning smell as lint sits near the heating element. Check the outside vent hood too. If the flap barely moves when the dryer runs, airflow is restricted somewhere in the line.